Previous Thread
Next Thread
Print Thread
Page 2 of 536 1 2 3 4 535 536
Joined: Aug 2002
Posts: 389
Likes: 1
H
Senior Member
Offline
Senior Member
H
Joined: Aug 2002
Posts: 389
Likes: 1
Speaking of Master Systems, can someone test Bank Panic on their end? It seems to be broken on all versions except smsj. CRC of the tested ROM image is B4DFB825; works with Meka's built-in BIOS (unless it's just a 'watch the SEGA logo' before the game starts), and in Dega.

Tested in MESS 0.126 with the v1.3, Hang-on and Alex Kidd BIOS sets, both NTSC and PAL.

Joined: Mar 2001
Posts: 17,234
Likes: 260
R
Very Senior Member
Offline
Very Senior Member
R
Joined: Mar 2001
Posts: 17,234
Likes: 260
Maybe it's a Japanese-region cart? Non-MESS emulators tend to skip region checks.

Joined: Feb 2007
Posts: 13
M
Member
Offline
Member
M
Joined: Feb 2007
Posts: 13
Bank Panic in Japan only for SG-1000.
The Master System cartridge was never released there, AFAIK.

And speaking of Master III again... Aren't the Masters from Tec Toy different from the others? They use PAL-M, not PAL. The games run faster on PAL-M.

Last edited by mattmess; 09/13/08 05:45 PM.
Joined: Aug 2002
Posts: 389
Likes: 1
H
Senior Member
Offline
Senior Member
H
Joined: Aug 2002
Posts: 389
Likes: 1
Looks like the version I've had for years is a bad dump. The [a1] set works fine. Old set is now exterminated!

Update (prior to posting) - Strangely though, the only differences in both ROMs were the last two bytes at 0x7FFE - 2020 (old version) versus 004C (a1 version).

Joined: Jul 2007
Posts: 4,625
A
Anna Wu Offline OP
Very Senior Member
OP Offline
Very Senior Member
A
Joined: Jul 2007
Posts: 4,625
SVN 3254
Windows binary
GUI
Properties - Miscellaneous

It seems one checkbox is superimposed .



Joined: Apr 2004
Posts: 1,563
Likes: 12
J
Very Senior Member
Offline
Very Senior Member
J
Joined: Apr 2004
Posts: 1,563
Likes: 12
Originally Posted by Heihachi_73
Speaking of Master Systems, can someone test Bank Panic on their end? It seems to be broken on all versions except smsj. CRC of the tested ROM image is B4DFB825; works with Meka's built-in BIOS (unless it's just a 'watch the SEGA logo' before the game starts), and in Dega.

Tested in MESS 0.126 with the v1.3, Hang-on and Alex Kidd BIOS sets, both NTSC and PAL.

Together with your next post this sounds like a checksum issue. The japanese bioses never calculate and match the checksums reported by a cartridge. The old sg1000 games did not have the checksum byte in their headers, so to keep backwards compatible sega removed the checksum checking from the japanese bios code. The euro and us bioses do calcuate and check the checksum however.

So, the sg1000 image that works on a euro/us bios is actually a checksum-fixed version of the original rom image.


Joined: Jul 2007
Posts: 4,625
A
Anna Wu Offline OP
Very Senior Member
OP Offline
Very Senior Member
A
Joined: Jul 2007
Posts: 4,625
SVN 3266

Othello Multivision driver

ROM check : not found
Maybe need change to : None required like for SG-1000

Othello Multivision cartridges are working with omv driver.

Last edited by Anna Wu; 09/15/08 08:36 AM.
Joined: Jan 2006
Posts: 3,691
Very Senior Member
Offline
Very Senior Member
Joined: Jan 2006
Posts: 3,691
No, as you can see in the source, a BIOS is possibly missing because no omv unit has been dumped yet. The message is correct.

Joined: Jul 2007
Posts: 4,625
A
Anna Wu Offline OP
Very Senior Member
OP Offline
Very Senior Member
A
Joined: Jul 2007
Posts: 4,625
r3261
[JUPITER] Fixed regression; driver works again.

I can load game cartridges (.ace), but i am not able after loading to start/control with the keyboard (Joystick is not available). Is this ok ?
Made a double check with the EightyOne emu, here i can start all my .ace files.

Another question :
The device view show me " Cartridge " for files with the .ace extension.
Other websites and emulators call this format "snapshot".
MESS not show me the device view for snapshots. Why ?

Last edited by Anna Wu; 09/15/08 09:57 AM.
Joined: Jul 2007
Posts: 4,625
A
Anna Wu Offline OP
Very Senior Member
OP Offline
Very Senior Member
A
Joined: Jul 2007
Posts: 4,625
Originally Posted by etabeta78
No, as you can see in the source, a BIOS is possibly missing because no omv unit has been dumped yet. The message is correct.

Has the original SG-1000 a bios ? If yes, why no required compare to omv ?

Last edited by Anna Wu; 09/15/08 10:00 AM.
Page 2 of 536 1 2 3 4 535 536

Link Copied to Clipboard
Who's Online Now
2 members (Kaylee, anoid), 221 guests, and 1 robot.
Key: Admin, Global Mod, Mod
ShoutChat
Comment Guidelines: Do post respectful and insightful comments. Don't flame, hate, spam.
Forum Statistics
Forums9
Topics9,328
Posts122,128
Members5,074
Most Online1,283
Dec 21st, 2022
Our Sponsor
These forums are sponsored by Superior Solitaire, an ad-free card game collection for macOS and iOS. Download it today!

Superior Solitaire
Forum hosted by www.retrogamesformac.com