Home Page Forums Other Emulator Message Boards Modeler and M1 0.7.6

...is available here . This is a minor bugfix release (I did add two more Seibu shmups courtesy of Ville Linde) and contrary to the scary warning Bridge 0.5.5 gives you it does work with this version, although I imagine Fujix will have a new version as soon as he can.

Extended note: the SPI games won't audit properly in Bridge 0.5.5. Basically Bridge and any other utilities working with M1 need to treat a CRC of 0 as "ignore the CRC, just check the name".

PPS: mameworld.info's a bit unstable lately (I really don't think it's the mass of people downloading M1 even though I'd like to) so try again later if you can't get through.

Thank you for updating. I'm updating Bridge.

One thing I noticed is that the PSG volume in YM2203 (#0.0 to #0.3) is still very high in sharrier. :shiver:

[Update] Probably the same setting in hangon.
OST is http://mame.page.ne.jp/hangon_ost.zip

[Update 2] Yet year fixes.
matrim: 2003 -> 2002
ridgerac: 1995 -> 1993

[Update 3] Some games in Irem M72/81/83/97/99 are clipped.
Especially in riskchal, quizf1, rtype2, dbreed.
And blswhstl is clipped too. I removed fixed_volume setting from Sunset Riders hard games.

[Update 4] baraduke hardware games.
Frequency change isn't synchronized with the start of a tone. They sound like portament.
drgnbstr #02 and #04, pacland #01 etc.

[Update 5] Wrong manufacturer
aceattac: Jaleco -> Sega

[Update 6] Voice and SFX are broken in shdancer

Hmm, I still can't make alsa work:
And then m1 stops.

Bridge has been updated supporting CRC 0 files.
And deleted nasty core version checking.

These relations of parents and clones are not set.
So I can't use merged MAME rom sets.

bublbobl - missb2
cotton - cottonj
gt3d - gt3dv18
tetrisp2 - tp2m32

And separate roms of spi are not recognized.

E:\ROM\MAME\rdft.zip (gd_*.*)
E:\ROM\M1\rdft.zip (rdft.nv)

[ROMPATH]
E:\ROM\MAME\
E:\ROM\M1\

m1 rdft

M1: arcade video and pinball sound emu by R. Belmont
Core ver 0.7.6, CUI ver 2.3
Copyright (c) 2001-2005. All Rights Reserved.

Reading configuration from m1.ini

Switching to game Raiden Fighters
Game selected: Raiden Fighters (Seibu, 1995)
open zip E:\ROM\MAME\/rdft.zip
Could not find file rdft.nv in zip E:\ROM\MAME\/rdft.zip

ERROR: unable to load ROM rdft.nv
ROM load error, bailing

Does some emulator actually support splitting a single set across multiple same-name zips like that?

Beleg: is your alsa-lib 1.0.6? Beyond that I don't know - that's pretty much why I didn't support ALSA previously. There's *way* more that can go wrong with it :-)

RB : No.

Hana : Either
A: Make sure E:\ROM\M1 is in listed first (the first dir listed will be parsed first) and just have a zip with the sound roms and rdft.nv in there, this is what I've done.

or

B: copy rdft.nv into your mame/roms zip

Easy.

My alsa is 1.0.9rf, the one from Fedora Core 4. Guess I'll have to stick to OSS for now.

I thought MAME did actually.

smf

To be honest I've never even tried...

But then I suppose it looks for CHD's in the CHD directory and the roms for them are in the rom dir...

So yeah, it may well do *shrug*