Home Page Forums MAME MAME TMS-09xx/1xxx thread (was New Dumps)

http://handheldempire.com/manufacturer.jsp?manufacturer=5
07 is Race N Chase
08 is Ice Hockey
Classic Football is the same game as Superstar Football, the difference is the case/buttons color and a 3-color VFD.

I doublechecked the ROM data of 2 Coleco h2h games and Entex Raise The Devil, no errors were found but I still want to recheck the bits behind a bad smudge via disasm (h2h football, row 5 col 10)

This one was easy. I vectored the keypad for it since it does not have a display.

http://blog.kevtris.org/blogfiles/Handhelds/Lakeside%20Le%20Boom/

I posted Entex Electronic Poker Info: www.seanriddle.com/tms1100.html

And a video for timing: www.seanriddle.com/entexpoker.AVI

This one is a TMS-1370. The only pinout I could find was a one-page diagram of various TMS chips showing the TMS-1300, but it has errors. So there's a chance my assignments are incorrect, but they mostly make sense.

Aaand another. CGL Super Kong is done.

http://blog.kevtris.org/blogfiles/Handhelds/CGL%20Super%20Kong/

Oh yeah I forgot about race n chase. Classic Football does indeed have a different VFD, but I didn't know if there were other changes or not. It's the only Bambino game with a multicolour VFD. The rest are all zinc sulfide (cyan) with various filters over the top, usually blue or green.

I posted Entex Jackpot Blackjack Gin Rummy: www.seanriddle.com/tms1400.html

And a video: www.seanriddle.com/entexjackpot.AVI

This one's the first TMS-1670, but I think I figured out the pinout from the PCB wiring.

Could you post a PCB photo of these two?
And what's the VFD serial? it's probably on the back of the VFD panel.

*edit* On Entex Poker, I'm pretty sure there's a bit hiding under the smudge in the rightmost column. If you have a high res die pic, can you double check it with that?

As for Entex Select-A-Game. I thought we had a skeleton driver for it in MESS but I must have confused it with Entex Adventurevision (drivers/advision.c).

It will have to await its turn. Or does another dev want to take it?

http://blog.kevtris.org/blogfiles/H...20a%20Game%20Cartridges%20Inside%202.jpg
The Football cart was mentioned here before, it must be TMS1x70.

I'll scan the PCBs and upload them. The VFDs are Itron FG1114.

Edit: I uploaded the PCB scans with the other pics. Sorry about the crappy desoldering job on the chips- my desoldering iron tip pretty much fell apart and I had to order more, but I didn't wait.

It's odd that 9 and DL are mapped to the same input on Poker, since it has a 4x7 button matrix and almost 1/2 of the positions are unused. But I took apart the keypad to make sure.

I didn't realize that inside the back glass of VFDs that you can see the traces going from the pins to the various grids and segments. I guess it's conductive paint like rear window defoggers use. It helped me figure out the pinout. www.seanriddle.com/pokervfdb.jpg

I don't have a top metal shot of Poker because the die was stuck in plastic, but here's the highest res pic I've got. I don't think there's a bit there, but I'll clean the die and take another look.